carnivalkits
Wednesday, March 8, 2017 1:05:07 PM
This is my version of the Pharaohs Fury, I designed it by getting all the information I could find and using pictures of the actual ride. I have printed it and made changes a few times and now this is the last print that has everything fitting and to a point where I am happy with it. This clip shows the model just adssembled but not painted or glued. I just raised the boat and released it and this is the result in slow motion. I think this is about the speed the boat should actually run. Let me know what you think.
You can purchase the four parts to this model at the following link.

https://www.shapeways.co...on=pharoahs+fury&s=0 


https://www.shapeways.co...on=pharoahs+fury&s=0  You need four prints to make the model, an aframe (there are two choices one with turbo lignts on both sides and one with them on only the front), the loading ramps with or without the fence (you can add your own), the boat and last the trailer.


I will be working on a running model using a computer system like the one I did on laser tech freakout.